<acronym id="s8ci2"><small id="s8ci2"></small></acronym>
<rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
<acronym id="s8ci2"></acronym>
<acronym id="s8ci2"><center id="s8ci2"></center></acronym>

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
電子發燒友網>電子資料下載>電源技術>低輸入電壓DC-DC升壓轉換器的啟動電路

低輸入電壓DC-DC升壓轉換器的啟動電路

2011-01-07 | rar | 746 | 次下載 | 免費

資料介紹

針對DC-DC升壓轉換器在低輸入電壓下無法正常工作的問題,提出了一種基于電容自舉原理的低輸入電壓的啟動電路。采用CSMC公司的0.5 μm CMOS混合信號工藝庫進行電路設計仿真,考慮到結構復雜的振蕩器在較低電源電壓下不能理想工作,同時為減小電路功耗,電路采用兩種不同簡單結構的環形振蕩器實現電容自舉,并利用反饋控制模塊進行合理的邏輯控制。仿真結果表明,0.8 V低輸入電壓時,通過升壓電路轉換,可將Vdd升高到2.4 V;振蕩信號變化時,輸出電壓變化微小,可以為DC-DC升壓轉換器提供穩定的電源電壓。
Abstract:
?Since DC-DC boost converter chip can not normally operate with the low input voltage, a sort of startup circuit based on bootstrap capacitor principle is proposed,and the circuit can operate with the low input voltage. The circuit is designed and simulated based on CSMC 0.5 μm CMOS mixed-signal process. Since the complex structure oscillator can not well operate under a lower supply voltage, to reduce the power dissipation, two different simple structure ring oscillators are adopted to achieve the bootstrap capacitor. The reasonable logic control is accomplished with feedback control module. The simulation results show that Vdd is increased to 2.4V under 0.8V low input voltage with the boost converter, output voltage less changes when oscillations signal changes. Stable power supply is attained for DC-DC converter chip.
下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1TC358743XBG評估板參考手冊
  2. 1.36 MB  |  330次下載  |  免費
  3. 2開關電源基礎知識
  4. 5.73 MB  |  6次下載  |  免費
  5. 3100W短波放大電路圖
  6. 0.05 MB  |  4次下載  |  3 積分
  7. 4嵌入式linux-聊天程序設計
  8. 0.60 MB  |  3次下載  |  免費
  9. 5基于FPGA的光纖通信系統的設計與實現
  10. 0.61 MB  |  2次下載  |  免費
  11. 651單片機窗簾控制器仿真程序
  12. 1.93 MB  |  2次下載  |  免費
  13. 751單片機大棚環境控制器仿真程序
  14. 1.10 MB  |  2次下載  |  免費
  15. 8基于51單片機的RGB調色燈程序仿真
  16. 0.86 MB  |  2次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234315次下載  |  免費
  3. 2555集成電路應用800例(新編版)
  4. 0.00 MB  |  33564次下載  |  免費
  5. 3接口電路圖大全
  6. 未知  |  30323次下載  |  免費
  7. 4開關電源設計實例指南
  8. 未知  |  21549次下載  |  免費
  9. 5電氣工程師手冊免費下載(新編第二版pdf電子書)
  10. 0.00 MB  |  15349次下載  |  免費
  11. 6數字電路基礎pdf(下載)
  12. 未知  |  13750次下載  |  免費
  13. 7電子制作實例集錦 下載
  14. 未知  |  8113次下載  |  免費
  15. 8《LED驅動電路設計》 溫德爾著
  16. 0.00 MB  |  6653次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935054次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537796次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234315次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191185次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183279次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138040次下載  |  免費
亚洲欧美日韩精品久久_久久精品AⅤ无码中文_日本中文字幕有码在线播放_亚洲视频高清不卡在线观看
<acronym id="s8ci2"><small id="s8ci2"></small></acronym>
<rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
<acronym id="s8ci2"></acronym>
<acronym id="s8ci2"><center id="s8ci2"></center></acronym>