資料介紹
In Chapter 3 many issues related to the operation and use of the central code of the DSP
processor were introduced. In particular the operation of the ALU, hardware multiplier,
various registers, control registers and the accumulator were all considered. In this section
we move on to consider the other facilities typically found on a DSP device. Figure 4.1
shows the hypothetical DSP device introduced in the previous chapter. As already mentioned we will use this device again as the basis for our discussion and as with Chapter 3
we will relate the generic DSP features presented in the hypothetical device with examples
taken from real devices.
In Figure 4.1, the central core is shown at the center of the DSP device. In this section
we will consider the components arranged outside the core but still inside the DSP device
itself. Most of these components are able to run in parallel with the DSP core, taking little
of the core’s available instruction cycle time. A good example of this is the on-chip timer
which can be initialized to interrupt the DSP device at a regular rate, e.g. every 1 ms. If the
timer was not available this task would be carried out using a software routine which
would directly impact on the core itself. By delegating tasks to on-chip components, the
processing core can be freed up to handle the more demanding arithmetic requirements
of the algorithm. Of course at start-up, when the DSP is reset, all of the peripheral components must be initialized and set to a known state. This has already been considered a
little in Section 2.2.1, although initialization issues will also be considered further here.
We start by looking at each of the components shown in Figure 4.1, as follows.
- 基于DSP控制器的油氣安全智能巡檢機器人 37次下載
- 基于FPGA和DSP的機載圖形顯示系統 36次下載
- TMS320C64x+ DSP 大字節DSP庫 程序員參考 7次下載
- 關于DSP-AD的參考文件 3次下載
- Interfacing the TLV2541 ADC and the TLV5618A DAC to the TMS320C31 DSP 9次下載
- DSP systems_ interfacing with th 7次下載
- Interfacing with C: Programming 0次下載
- Debugging Serial Bus Systems w 15次下載
- The Death of the DSP 27次下載
- RFID Systems Product Specifica 8次下載
- RFID Systems Product Specifica 1次下載
- Interfacing the TMS320C54x DSP 8次下載
- Interfacing the TLC5510 Analog 7次下載
- Alternative Power Systems for 28次下載
- Interfacing 3V and 5V applicat 9次下載
- dsp芯片和arm芯片區別 dsp的應用領域 805次閱讀
- dsp是什么意思 dsp怎么調音質最好 1583次閱讀
- DSP芯片的特點與分類 928次閱讀
- Normal World與Secure World的地址空間隔離是如何實現的 490次閱讀
- 如何編寫第一個hello world程序 7830次閱讀
- 米爾科技HELLO WORLD主板介紹 2021次閱讀
- 米爾科技Linux簡單Hello World應用程序的教程 1160次閱讀
- ABB機器人之高級編程 安全域World Zone的使用 1w次閱讀
- FPGA會取代DSP嗎?FPGA與DSP區別介紹 3.5w次閱讀
- dsp28335開發板中文資料匯總(dsp28335最小系統_引腳圖_封裝_初始化程序) 6w次閱讀
- dsp28335如何入門:程序設計步驟 1.9w次閱讀
- 詳細解析WORLD語音合成系統的原理以及使用方法 1.5w次閱讀
- DSP芯片的特點與分類 1.1w次閱讀
- 基于EMIF接口的DSP控制系統設計 5576次閱讀
- 基于DSP的智能電源系統設計 5052次閱讀
下載排行
本周
- 1RSA306B頻譜分析儀技術資料匯總
- 未知 | 204次下載 | 免費
- 2RSA500A系列便攜式頻譜分析儀技術盤點
- 未知 | 157次下載 | 免費
- 3高幅度波形/ 函數發生器汽車、半導體、科學和工業應用測量剖析
- 未知 | 141次下載 | 免費
- 4基于PT100的溫度測量系統設計
- 0.4 MB | 71次下載 | 1 積分
- 5RF能量的治療與美容分析
- 0.6 MB | 55次下載 | 1 積分
- 6FANUC第四軸的開通及設定方法
- 0.4 MB | 33次下載 | 1 積分
- 7PT100鉑熱電阻測溫實驗
- 0.4 MB | 32次下載 | 1 積分
- 8直流無刷電機驅動與失速電流限制參考設計
- 10.6 MB | 30次下載 | 1 積分
本月
- 1RSA306B頻譜分析儀技術資料匯總
- 未知 | 204次下載 | 免費
- 2RSA500A系列便攜式頻譜分析儀技術盤點
- 未知 | 157次下載 | 免費
- 3高幅度波形/ 函數發生器汽車、半導體、科學和工業應用測量剖析
- 未知 | 141次下載 | 免費
- 4基于PT100的溫度測量系統設計
- 0.4 MB | 71次下載 | 1 積分
- 5RF能量的治療與美容分析
- 0.6 MB | 55次下載 | 1 積分
- 6FANUC第四軸的開通及設定方法
- 0.4 MB | 33次下載 | 1 積分
- 7PT100鉑熱電阻測溫實驗
- 0.4 MB | 32次下載 | 1 積分
- 8直流無刷電機驅動與失速電流限制參考設計
- 10.6 MB | 30次下載 | 1 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935094次下載 | 免費
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420050次下載 | 免費
- 3Altium DXP2002下載入口
- 未知 | 233068次下載 | 免費
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191334次下載 | 免費
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183317次下載 | 免費
- 6labview8.5下載
- 未知 | 81569次下載 | 免費
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73795次下載 | 免費
- 8NI LabVIEW中實現3D視覺的工具和技術
- 未知 | 70088次下載 | 免費
評論
查看更多