資料介紹
This document provides practical, common guidelines for incorporating PCI Express interconnect
layouts onto Printed Circuit Boards (PCB) ranging from 4-layer desktop baseboard designs to 10-
layer or more server baseboard designs. Guidelines and constraints in this document are intended
for use on both baseboard and add-in card PCB designs. This includes interconnects between PCI
Express devices located on the same baseboard (chip-to-chip routing) and interconnects between
a PCI Express device located “down” on the baseboard and a device located “up” on an add-in
card attached through a connector.
This document is intended to cover all major components of the physical interconnect including
design guidelines for the PCB traces, vias and AC coupling capacitors, as well as add-in card
edge-finger and connector considerations. The intent of the guidelines and examples is to help
ensure that good high-speed signal design practices are used and that the timing/jitter and
loss/attenuation budgets can also be met from end-to-end across the PCI Express interconnect.
However, while general physical guidelines and suggestions are given, they may not necessarily
guarantee adequate performance of the interconnect for all layouts and implementations.
Therefore, designers should consider modeling and simulation of the interconnect in order to
ensure compliance to all applicable specifications.
The document is composed of two main sections. The first section provides an overview of
general topology and interconnect guidelines. The second section concentrates on physical layout
constraints where bulleted items at the beginning of a topic highlight important constraints, while
the narrative that follows offers additional insight.
- 非常詳細的PCB設計規范 27次下載
- 貝爾PCB設計規范 0次下載
- 臺灣神達電腦集團pcb設計規范.zip
- 華碩PCB設計規范 0次下載
- 華為印制電路板PCB設計規范下載 236次下載
- 華為印制電路板PCB設計規范 180次下載
- 華為PCB設計規范資料下載 0次下載
- 華為公司PCB設計規范 0次下載
- 華碩內部的PCB設計規范 0次下載
- 印制板(PCB)設計規范 0次下載
- pcb設計規范 貝爾 0次下載
- PCB設計規范—設計要點 0次下載
- 好威PCB設計規范 0次下載
- 華為PCB設計規范 0次下載
- 開關電源的PCB設計規范 373次下載
- 解讀PCB設計規范 707次閱讀
- SMT-PCB拼版設計規范 887次閱讀
- PCB平衡銅是什么意思 405次閱讀
- PCB設計中為什么需要先進行扇孔 9144次閱讀
- PCB設計的六個檢查階段 3263次閱讀
- 輕松簡單就能學會PCB的設計規范 2414次閱讀
- 梳理一下與PCB設計相關的關鍵步驟讓工程師能夠清晰掌握 3525次閱讀
- PCB設計規范要領 4537次閱讀
- 基于PCB設計的阻抗控制實現 1446次閱讀
- PCB設計中如何設置格點_pcb設計中格點的設置方法 1.1w次閱讀
- 一文了解pcb貼裝元器件焊盤設計規范 4107次閱讀
- 一文解讀鋁基板pcb制作規范及設計規則 1.9w次閱讀
- 在不同的PCB設計平臺文件轉SIGRITY平臺方法的詳細解析 4954次閱讀
- 【收藏】268條PCB Layout及電路設計規范 4809次閱讀
- PCB電路板的EMI設計規范步驟 2209次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1497次下載 | 免費
- 2TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 3單片機典型實例介紹
- 18.19 MB | 103次下載 | 1 積分
- 4S7-200PLC編程實例詳細資料
- 1.17 MB | 28次下載 | 1 積分
- 5筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 6開關電源原理及各功能電路詳解
- 0.38 MB | 15次下載 | 免費
- 79天練會電子電路識圖
- 5.91 MB | 6次下載 | 免費
- 8100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234314次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33564次下載 | 免費
- 6接口電路圖大全
- 未知 | 30321次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21540次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537794次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234314次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183278次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多