監測人體健康和運動表現

　　監測人體健康和運動表現

　　高度微型化的傳感器系列，如壓電MEMS和光學傳感器，使人體監測應用的快速發展，借助高精度模擬和處理芯片，以及最新的IEEE 802.15.6無線體域網的出現（禁止）標準。

　　簡介：市場增長引擎

　　2012，IEEE發布了無線體域網（BAN）標準，IEEE 802.15.6，短距離無線通信”在附近，或在人體。該標準特別規定了在人體組織中安全使用rf輻射的一些方面，如人體和性別之間的差異影響，以及對服務質量的支持，使各種傳感器的數據流優先化。這些，如低功耗，其他關鍵方面互不干涉的保證，安全性高，區分標準IEEE 802.15.6禁止從個人區域網（PAN）的標準，如藍牙、ZigBee??，和更適合去禁止應用的廣度。

　　該標準的出版應該為許多新產品的開發和應用提供催化劑，如醫療保健、個人健康監測和體育健身等。便攜式和可穿戴式測量生命體征，如心率、血壓和血糖的市場正在增長，這是由于微控制器等電子產品的成本下降，以及微型傳感器的開發，這些傳感器的舒適性和易用性。

　　最近，在微小的MEMS傳感器能夠檢測的線性和角運動，同時市場的到來，力/壓力和方向提供了機會，許多新類型的活動監控設備的應用范圍從假肢控制運動性能監測和運動安全。

　　Monitoring vital signs

　　Monitoring heart activity is a basic requirement in healthcare activities from initial patient assessment to ensuring safety during surgical procedures and managing life-support equipment. ECG machines have been used for many years in hospitals and doctors’ surgeries. More recently， portable， low-cost heart monitoring equipment has increased opportunities for home monitoring by patients， as well as athletic performance monitoring by sports people and enthusiasts. Cardiac activity can be detected by sensing electrical signals that are associated with the repeated depolarization and repolarization of the heart’s ventricles. These signals are sensed using electrodes， which may be attached at several points on the body such as the chest， arms， and legs to help improve accuracy by eliminating common-mode noise. In HRMs （heart-rate monitors） for sports applications， the sensor may be contained in a chest strap that can be worn easily without inhibiting movement. Analog Devices has a ready-to-use heart-rate monitor front-end IC （AD8232） and evaluation board （AD8232-EVALZ）， configured for applications that use three electrodes. Freescale supports development of HRM applications on its Kinetis or Flexis microcontrollers through its MED-EKG development board （Figure 1）， which plugs into the Freescale Tower System prototyping platform. This approach gives designers the choice of using a discrete instrumentation amplifier mounted on the board or taking advantage of microcontroller analog peripherals. Fingertip electrodes are provided on the board or， alternatively， low-cost external electrodes may be attached for greater accuracy.