NCP51705主要特性_內部框圖以及應用電路

On Semi公司的NCP51705驅動器是設計用來驅動SiC MOSFET晶體管,為了得到盡可能低導通損耗,驅動器能驅動SiC MOSFET器件的最大可允許柵極電壓,源電流和沉電流為6A,并提供重要的保護功能如基本電源的欠壓鎖住監視和基于驅動電路的結溫的熱關斷,主要用在驅動SiC MOSFET晶體管,工業逆變器,馬達驅動和PFC,AC疍C轉換器和DC／DC轉換器.本文介紹了NCP51705主要特性,內部框圖,低邊開關配置圖和應用電路,以及NCP51705 Mini 評估板和NCP51705 Mini SMD評估板主要特性,電路圖,材料清單和PCB設計圖.

The NCP51705 driver is designed to primarily drive SiC MOSFETtransistors. To achieve the lowest possible conduction losses, thedriver is capable to deliver the maximum allowable gate voltage to theSiC MOSFET device. By providing high peak current during turn?onand turn?off, switching losses are also minimized. For improvedreliability, dV／dt immunity and even faster turn?off, the NCP51705can utilize its on?board charge pump to generate a user selectablenegative voltage rail.

For full compatibility and to minimize the complexity of the biassolution in isolated gate drive applications the NCP51705 alsoprovides an externally accessible 5 V rail to power the secondary sideof digital or high speed opto isolators.

The NCP51705 offers important protection functions such asunder?voltage lockout monitoring for the bias power and thermalshutdown based on the junction temperature of the driver circuit.

NCP51705主要特性:

? High Peak Output Current with Split Output Stages to allowindependent Turn?ON／Turn?OFF Adjustment;
? Source Capability: 6 A
? Sink Capability: 6 A
? Extended Positive Voltage Rating for Efficient SiC MOSFETOperation during the Conduction Period
? User?adjustable Built?in Negative Charge Pump for Fast Turn?offand Robust dV／dt Immunity
? Accessible 5 V Reference／Bias Rail for Digital Oscillator Supply
? Adjustable Under?Voltage Lockout
? Desaturation Function
? Thermal Shutdown Function (TSD)
? Small & Low Parasitic Inductance QFN24 Package

NCP51705典型應用:

? Driving SiC MOSFET
? Industrial Inverters, Motor Drivers
? PFC, AC to DC and DC to DC Converters

圖1.NCP51705內部框圖

圖2.NCP51705低邊開關配置圖

圖3.NCP51705典型應用電路圖

圖4. NCP51705半橋柵極驅動電路圖

NCP51705 Mini 評估板

This document describes the use and applications for theNCP51705 SiC driver mini EVB. The EVB is designed ona four layer PCB and includes the NCP51705 driver and all the necessary drive circuitry. The EVB also includes anon?board digital isolator and the ability to solder anyMOSFET or SiC MOSFET in a T0247 high voltagepackage. The EVB does not include a power stage and isgeneric from the point of view that it is not dedicated to anyparticular topology. It can be used in any low?side orhigh?side power switching application. For bridgeconfigurations two or more of these EVBs can be configuredin a totem pole type drive configuration. The EVB can beconsidered as an isolator+driver+T0247 discrete module.

圖5.評估板NCP51705 EVB(35 mm x 15 mm x 5 mm)外形圖

圖6.評估板NCP51705 EVB電路圖
評估板NCP51705 EVB材料清單:

圖7.評估板NCP51705 EVB頂層裝配圖

圖8.評估板NCP51705 EVB底層裝配圖

圖9.評估板NCP51705 EVB頂層圖

圖10.評估板NCP51705 EVB層2圖

圖11.評估板NCP51705 EVB層3圖

圖12.評估板NCP51705 EVB底層圖

NCP51705 Mini SMD評估板

This document describes the use and applications for the NCP51705SiC driver mini SMD EVB. The EVB is designed on a four layer PCBand includes the NCP51705 driver and all the necessary drivecircuitry. The EVB also includes an on?board digital isolator and the ability to solder any MOSFET or SiC MOSFET in a TO?247 highvoltage package. The EVB does not include a power stage and isgeneric from the point of view that it is not dedicated to any particulartopology. It can be used in any low?side or high?side power switchingapplication. For bridge configurations two or more of these EVBs canbe configured in a totem pole type drive configuration. The EVB canbe considered as an isolator+driver+TO?247 discrete module.

圖13.NCP51705 Mini SMD評估板外形圖(1)

圖14.NCP51705 Mini SMD評估板頂層和底層圖

圖15.NCP51705 Mini SMD評估板簡化框圖

圖16.NCP51705 Mini SMD評估板電路圖
NCP51705 Mini SMD評估板材料清單:

圖17.NCP51705 Mini SMD評估板PCB頂/底層裝配圖

圖18.NCP51705 Mini SMD評估板PCBINNER_1/INNER_2層布局圖

圖19.NCP51705 SiC EVB PCB打孔圖

圖20.NCP51705 SiC EVB未安裝時PCB的測試配置圖