<acronym id="s8ci2"><small id="s8ci2"></small></acronym>
<rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
<acronym id="s8ci2"></acronym>
<acronym id="s8ci2"><center id="s8ci2"></center></acronym>
0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示

NXP MPC5744P 32位200MHzMCU開發方案

電子工程師 ? 作者:工程師陳翠 ? 2018-06-17 18:54 ? 次閱讀

nxp公司的MPC574xP系列是32位嵌入Power Architecture? MCU,滿足汽車和工業安全應用的最高級安全標準。工作頻率高達200MHz,嵌入浮點單元,支持安全標準ISO 26262 / ASIL D,器件結溫高達150°C或165°C,適合汽車底盤和安全以及工業應用。本文介紹了MPC5744P主要特性,框圖,以及三相PSMS馬達開發板MTRCKTSPS5744P主要特性,框圖和電路圖。

The MPC574xP MCU family features a 32-bit embedded Power Architecture?。 It meets the highest functional safety standards for automotive and industrial functional safety applications.Integrated safety architecture minimizes additional software and development churn Programmable Fault Collection and Control Unit (FCCU) monitors the integrity status of the device and provides flexible safe state control End-to-End Error Correcting Code (e2eECC) improves fault tolerance and detection Part of the SafeAssure? program, helping manufacturers achieve functional safety standard compliance.

MPC5744P主要特性:

? The MPC5744P microcontroller is based on the PowerArchitecture? developed by Freescale. It targetschassis and safety applications and other applicationsrequiring a high Automotive Safety Integrity Level(ASIL)。 The MPC5744P is a SafeAssure solution.

? This document provides electrical specifications, pinassignments, and package diagram information for theMPC5744P series of microcontroller units (MCUs).For functional characteristics and the programmingmodel, see the MPC5744P Reference Manual.

? Junction temperature: The upper limit is 150℃ or165℃ depending on the device marking.

NXP MPC5744P 32位200MHzMCU開發方案

圖1.MPC5744P框圖

三相PSMS馬達開發板MTRCKTSPS5744P

The MTRCKTSPS5744P development kit demonstrates the advantages of the NXP? MPC5744P MCU for motor control applications with a three-phase permanent magnet synchronous motor (PMSM) and resolver position sensor.DEVKIT-MPC5744P: Development Board for MPC5744P

The DEVKIT-MPC5744P features the MPC5744P, a 32-bit automotive microcontroller based on Power Architecture? technology. The MPC5744P addresses Automotive/Industrial functional safety and motor control applications. It offers dual e200z4 lockstep cores, motor control, safety, and communication interfaces to facilitate a complete safety/chassis solution.

DEVKIT-MPC5744P is a development tool for MPC5744P and provides easy access to more than 100 GPIOs plus access to onboard CAN, LIN, FlexRay, etc. The standard form factor compatible with the Arduino pin layout provides a broad range of expansion options. The board can be powered with an external power supply or directly through USB.

圖2.三相PSMS馬達開發板MTRCKTSPS5744P外形圖

NXP MPC5744P 32位200MHzMCU開發方案

圖3.三相PSMS馬達開發板MTRCKTSPS5744P主要元件分布圖

三相PSMS馬達開發板MTRCKTSPS5744P主要特性:

?MPC5744P has 2 x 200 MHz Power Architecture? e200Z4 Dual issue cores operating in delayed lockstep

?MPC5744P qualified to AEC-Q100 Grade 1 and ambient temperature of -40 to +125 ℃

?Arduino? UNO R3 footprint-compatible with expansion “shield” support

?Supports DEVKIT-MOTORGD motor control shield

?Integrated Open-standard Serial and Debug Adapter (OpenSDA) with support for several industry-standard debug interfaces as well as JTAG connector

?Easy access to the MCU I/O header pins for prototyping

?On-chip connectivity for FlexRay, CAN, LIN, UART/SCI and SPI

?Potentiometer for precise voltage and analog measurement

?One user RGB LED (1 red, 1 green, 1 blue in single package)

?2 user push-button switches

?Flexible power supply options

?micro-B USB

?12V External power supply

?Similar hardware across ARM,S12 and Power Architecturearchitecturebased MCUs

?Box includes:

?DEVKIT-MPC5744P Board

?Downloads includes:

?Quick Start Package

?S32 Design Studio IDE

?Application notes

MPC5744P in 144-pin LQFP

On-Board OpenSDA circuit for debugging

USB to Serial Interface

1 x RGB LED

Power LEDs indicators

1 x ADC potentiometer, 2 x push buttons

Supports, LIN, CAN, FlexRay, UART connectors

三相PSMS馬達開發板MTRCKTSPS5744P包括:

DEVKIT-MPC5744P Evaluation Board

USB Type-A to micro-USB Type-B cable

NXP MPC5744P 32位200MHzMCU開發方案

圖4.三相PSMS馬達開發板MTRCKTSPS5744P框圖

NXP MPC5744P 32位200MHzMCU開發方案

圖5.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(1)

NXP MPC5744P 32位200MHzMCU開發方案

圖6.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(2)

NXP MPC5744P 32位200MHzMCU開發方案

圖7.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(3)

NXP MPC5744P 32位200MHzMCU開發方案

圖8.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(4)

NXP MPC5744P 32位200MHzMCU開發方案

圖9.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(5)

NXP MPC5744P 32位200MHzMCU開發方案

圖10.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(6)

NXP MPC5744P 32位200MHzMCU開發方案

圖11.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(7)

NXP MPC5744P 32位200MHzMCU開發方案

圖12.三相PSMS馬達開發板MTRCKTSPS5744P電路圖(8)

聲明:本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人,不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用,如有內容侵權或者其他違規問題,請聯系本站處理。 舉報投訴
  • NXP公司
    +關注

    關注

    1

    文章

    21

    瀏覽量

    17021
  • MPC5744P
    +關注

    關注

    1

    文章

    9

    瀏覽量

    8115
收藏 人收藏

    評論

    相關推薦

    設計了一個關于mpc5744p板子,電路設計基本上都是按照mpc5744p電路,請問為什么燒寫程序燒不進去?

    我有個問題,我設計了一個關于mpc5744p板子,電路設計基本上都是按照mpc5744p電路,為什么燒寫程序燒不進去??
    發表于 06-29 11:45

    MPC5744P的內部協處理器FPU是默認開啟的嗎?

    MPC5744P的內部協處理器FPU是默認開啟的嗎?需不需要通過設置某些寄存器開啟相應的硬件浮點運算功能,該怎么做?通過閱讀datasheet發現寄存器MSR有相應的功能,但是在S32中沒有找到寄存器。
    發表于 10-19 22:59

    MPC5744P的Overlay RAM相關資料分享

    內容提要引言1. MPC5744P的Overlay RAM工作原理介紹2 MPC5744P的Flash Overlay配置詳解2.1 平臺Flash標定區域描述字寄存器配置字
    發表于 11-04 07:53

    如何學習MPC5744P CAN總線?

    如何學習MPC5744P CAN總線?
    發表于 02-07 08:58

    請問Devkit MPC5744P板上的CAN1端口在哪里?

    我需要在 Devkit MPC5744P 板上測試 Flexcan1 通信,但我只能找到 CAN0 端口。你能告訴我 CAN1 端口在哪里嗎?我找不到它。
    發表于 03-14 13:33

    如何對MPC5744P進行編程?

    目前我正在學習如何對 MPC5744P 進行編程,但在嘗試創建簡單的 UART 應用程序時目前無法解決此問題。當我將 UART + CAN 示例用于 MPC5744P 時,UART 和 CAN 在環
    發表于 03-16 08:36

    如何驗證MPC5744P FPU是否正常工作?

    我想知道是否啟用了 MPC5744P 浮點單元?我參考了一些帖子并將我的 S32DS 設置為如下所示,是否正確?以及如何選擇合適的庫支持謝謝~!
    發表于 03-23 08:51

    MPC5744P標志如何保留在RAM中?

    我正在為 MPC5744P 編寫引導加載程序。當在 APP 中檢測到下載請求時,看門狗復位用于從 APP 跳轉到引導加載程序。我想將此請求標志保存在 RAM 中。當項目重置時,標志如何保留在 RAM 中?謝謝你!
    發表于 03-27 09:10

    如何為MPC5744P配置內存保護單元?

    我想知道更多關于如何為 MPC5744P 配置內存保護單元,我需要知道如何使用這個配置器。
    發表于 04-04 09:03

    在MCU MPC5744P上,需要SENT模塊軟件驅動,求分享

    在MCU MPC5744P上,我需要SENT模塊軟件驅動,謝謝。
    發表于 04-17 08:50

    MPC5744P在正交解碼A和B兩個通道可以在兩個eTimer模塊中嗎?

    MPC5744P在正交解碼A和B兩個通道可以在兩個eTimer模塊中嗎?MPC5744P正交解碼后在哪個寄存器中讀取正轉或反轉?SDK3.0.3ABI正交解碼后CNTR寄存器中的值是否計數?
    發表于 04-18 06:42

    求助,索取有關在帶有MPC5744P MCU的RD33771 EVB中啟用鎖步功能的文檔

    我目前正在從事電池管理系統 (BMS) 項目并使用 RD33771 EVB以及開發軟件由 NXP 提供用于開發目的。該板配備MPC5744P微控制器,支持鎖步功能。 如果您能協助我提供
    發表于 05-24 08:27

    基于恩智浦MPC5744P的CAN驅動開發和測試

    摘要 本篇筆記主要記錄基于恩智浦MPC5744P的CAN驅動開發和測試,接口設計,封裝為BSP驅動,為之后實現CAN的高層通信打下基礎。。 準備工作 安裝S32DS for PA, 因為我們
    的頭像 發表于 09-03 11:35 ?3807次閱讀
    基于恩智浦<b class='flag-5'>MPC5744P</b>的CAN驅動<b class='flag-5'>開發</b>和測試

    基于恩智浦MPC5744P的SAE J1939協議棧開發

    摘要 本篇筆記主要記錄基于恩智浦MPC5744P的SAE J1939協議棧開發,接口設計,以之前總結的CAN驅動設計為基礎。 準備工作 準備一個CAN驅動可以正常工作的工程。 熟悉J1939協議文檔
    的頭像 發表于 09-24 16:15 ?7852次閱讀
    基于恩智浦<b class='flag-5'>MPC5744P</b>的SAE J1939協議棧<b class='flag-5'>開發</b>

    恩智浦MPC5744P微控制器芯片手冊

    恩智浦MPC5744P微控制器芯片手冊免費下載。
    發表于 03-04 16:06 ?23次下載
    亚洲欧美日韩精品久久_久久精品AⅤ无码中文_日本中文字幕有码在线播放_亚洲视频高清不卡在线观看
    <acronym id="s8ci2"><small id="s8ci2"></small></acronym>
    <rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
    <acronym id="s8ci2"></acronym>
    <acronym id="s8ci2"><center id="s8ci2"></center></acronym>