<acronym id="s8ci2"><small id="s8ci2"></small></acronym>
<rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
<acronym id="s8ci2"></acronym>
<acronym id="s8ci2"><center id="s8ci2"></center></acronym>
0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示

微雪電子STM32F767ZI 開發板簡介

微雪電子 ? 來源:微雪電子 ? 作者:微雪電子 ? 2019-12-26 16:28 ? 次閱讀

NUCLEO-F767ZI STM32F767ZI開發板

板載ST-LINK/V2,支持mbed功能,Arduino擴展

型號 NUCLEO-F767ZI

產品簡介

The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features.

The ST Zio connector, which is an extension of Arduino?Uno V3, provides access to more peripherals and ST morpho headers make it easy to expand the functionality of the Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo-144 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as a direct access to the ARM?mbed?online resources at http://mbed.org.

NUCLEO-F767ZI 是ST公司推出的一款針對STM32F7系列設計的Cortex-M7 Nucleo-144開發板,支持mbed,兼容Arduino、還帶有ST Zio和 ST Morpho 擴展接口,可連接微控制器的所有周邊外設。

開發板基于STM32F767ZI設計,開發板還集成了ST-LINK/V2-1仿真下載器(但僅對外提供SWD接口),免除您另外采購仿真器或下載器的麻煩。并且具備Arduino接口,可接入 Arduino 巨大生態系統的各種 Shield 擴展板,讓您能夠輕松快速增加特殊功能。

ST提供豐富的示例程序,讓您更快速的入門STM32F7單片機。一起來釋放您的創造力吧!

【特點】

STM32 microcontroller in LQFP144 package

Two types of extension resources:

ST Zio connector including: support for Arduino?Uno V3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals

ST morpho extension pin header footprints for full access to all STM32 I/Os

ARM?mbed?-enabled (see http://mbed.org)

On-board ST-LINK/V2-1 debugger/programmer with SWD connector:

Selection-mode switch to use the kit as a standalone ST-LINK/V2-1

USB re-enumeration capability. Three different interfaces supported on USB: virtual COM port, mass storage, debug port

Flexible board power supply:

5 V from ST-LINK/V2-1 USB VBUS

External power sources: 3.3 V and 7 - 12 V on ST Zio or ST morpho connectors, 5 V on ST morpho connector

USB OTG or full-speed device with Micro-AB connector (depending on STM32 support)

IEEE-802.3-2002 compliant Ethernet connector (depending on STM32 support)

Three user LEDs

Two push-buttons: USER and RESET

LSE crystal:

32.768 KHz crystal oscillator

Comprehensive free software HAL library including a variety of software examples

Support of wide choice of Integrated Development Environments (IDEs) including IAR?, Keil?, GCC-based IDEs, ARM?mbed?

【資源簡介圖】


NUCLEO-F767ZI 帶包裝正面圖


NUCLEO-F767ZI 帶包裝反面圖


NUCLEO-F767ZI 開發板 圖一


NUCLEO-F767ZI 開發板 圖二


NUCLEO-F767ZI 開發板 圖三


NUCLEO-F767ZI 開發板 圖四

外形尺寸

聲明:本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人,不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用,如有內容侵權或者其他違規問題,請聯系本站處理。 舉報投訴
  • 嵌入式主板
    +關注

    關注

    7

    文章

    6067

    瀏覽量

    34699
  • 微雪電子
    +關注

    關注

    9

    文章

    873

    瀏覽量

    6376
收藏 人收藏

    評論

    相關推薦

    用NUCLEO STM32F767ZI SAI SPDIF功能,想配置11.025KHz的采樣率HSE不能用板子上的8MHz嗎?

    我用NUCLEO STM32F767ZI SAI SPDIF 功能, 想配置11.025KHz的采樣率, HSE不能用板子上的8MHz嗎? 芯片內部不是有專門給SAI用的PLL嗎? 需要特定
    發表于 04-18 08:20

    STM32F767ZI-Nucleo開發板跑官方HTTP例程有時候不能自動獲取IP,為什么?

    STM32F767ZI-Nucleo開發板跑官方HTTP例程有時候不能自動獲取IP,調試中發現只要是不能獲取IP時很大幾率就是以太網中斷不能進去。想請問一下這可能是什么問題引起的,唯一的改動就是
    發表于 04-25 06:02

    stm32f7之gpio

    ` 本帖最后由 630183258 于 2016-8-25 22:21 編輯 1、電路圖開發板型號:STM32F767ZI Nucleo-1442、選擇芯片型號3、設置PB7為輸出口3、設置PB7上拉 4、生成工程添加代碼最后附上工程文件:本人正在申請
    發表于 08-25 22:02

    基于STM32F767ZI的人工智能庫

    聽說了ST公司新出了人工智能庫,網上的教程是基于STM32F767ZI開發,因為手里只有STM32F429的板子,看介紹F4的板子應該也支持,所以試著用
    發表于 08-04 08:10

    基于STM32F767ZI芯片的stm32工程

    ###一、生成stm32工程1、選擇STM32F767ZI芯片2、配置時鐘源3、配置外設(串口及網卡)4、生成代碼###二、下載LWIP源碼1.下載最新版本2.1.2,其他版本亦可。2.在STM32
    發表于 08-10 07:20

    STM32CubeMX Nucleo F767ZI教程

    STM32CubeMX Nucleo F767ZI 教程(1)STM32CubeMX Nucleo F767ZI 教程(1)STM32Cub
    發表于 08-24 08:06

    怎樣在ubuntu下對STM32F767ZI NUCLEO144進行開發

    NUCLEO-F767ZI有哪些特征?怎樣在ubuntu下對STM32F767ZI NUCLEO144進行開發?
    發表于 10-15 08:43

    如何使用STM32F767ZI NUCLEO Board以太網與IOT云進行通信?

    我已經在互聯網上檢查了各種示例,但我沒有找到任何一個為我工作,該甚至沒有連接到路由器,我已經嘗試過靜態和動態 IP我是以太網和 LwIP 的新手你能給我提供任何關于 STM32F767ZI
    發表于 12-26 10:22

    怎樣通過USB對STM32F767ZI進行編程呢?

    我正在為我正在進行的項目小型化 STM32F767ZI,并希望它的功能與標準 STM32F767ZI 相同。其中一部分包括電路的 ST-Link 方面,因此我們可以通過 USB 對其進行編程。除了原理圖之外,我還沒有找到任何資
    發表于 12-26 11:00

    怎樣通過STM32F767zi微控制器的DAC生成驅動信號呢?

    我正在建造電場傳感器。它的驅動信號是通過 STM32F767zi 微控制器的 DAC 產生的。信號為 4 kHz,通過 DMA 和 TIM6 以 80 kHz 的采樣速度生成。正如您從圖片中看到的那樣,信號中有錯誤,就像每 10-20 個波長有 1 個損壞的樣本。
    發表于 01-05 06:13

    STM32F767ZI連接微型USB ST-Link時沒有被檢測到是何原因?

    我剛開始使用 STM32。我買了一塊STM32F767ZI。我安裝了STM-link utility V4.6版本和stm-link009驅動。當我將 nucleo 的微型
    發表于 01-06 07:58

    STM32F446RE和STM32F767ZI的SPI時鐘波形不一樣是為什么?

    STM32F446RE(它工作的地方)和 STM32F767ZI(輸出始終為 0V)上測試 SPI DAC (TI DAC8563) 時,我注意到一個不同的 SPI 時鐘波形。在 F4 中,您有
    發表于 01-16 06:13

    STM32CubeProgrammer與NUCLEO STM32F767ZI配合良好,但無法找到NUCLEO STM32F446RE怎么處理?

    您好,我有 2 個 Nucleo 開發板:NUCLEO STM32F767ZI (F4) 和 NUCLEO STM32F446RE (F7)
    發表于 02-08 08:43

    NUCLEO-F767ZI開發板評測

    本文主要介紹了NUCLEO-F767ZI開發板評測,NUCLEO-F767ZI是意法半導體ST公司推出的低成本Nucleo評估板,目前為止,Nucleo系列可分為Nucleo-32
    發表于 01-05 17:16 ?1.1w次閱讀
    NUCLEO-F<b class='flag-5'>767ZI</b><b class='flag-5'>開發板</b>評測

    STM32CubeMX Nucleo F767ZI 教程(2)

    STM32CubeMX Nucleo F767ZI 教程(2)STM32CubeMX Nucleo F767ZI 教程(1)STM32Cub
    發表于 12-06 10:06 ?20次下載
    <b class='flag-5'>STM32</b>CubeMX Nucleo F<b class='flag-5'>767ZI</b> 教程(2)
    亚洲欧美日韩精品久久_久久精品AⅤ无码中文_日本中文字幕有码在线播放_亚洲视频高清不卡在线观看
    <acronym id="s8ci2"><small id="s8ci2"></small></acronym>
    <rt id="s8ci2"></rt><rt id="s8ci2"><optgroup id="s8ci2"></optgroup></rt>
    <acronym id="s8ci2"></acronym>
    <acronym id="s8ci2"><center id="s8ci2"></center></acronym>